Proterial Cable America’s robust Category 5e Outdoor Cables are designed to offer reliable performance regardless of the conditions in which they were installed.
These Cat5e Cables have tough polyethylene outer jackets with carbon black to protect the cable core from water and the harsh sun. A gel-filled inner core prevents the migration of any water that may have breached the outer layers of protection.
Whether used in lashed aerials, ducts, or underground conduits, these data cables meet high technical performance reliability standards. They are designed to deliver Gigabit speeds as well as power to outdoor Power over Ethernet (PoE) devices.
Part Number | 30145-8 |
Manufacturing | This Outdoor Cat5e Cable is produced and manufactured in the USA |
Cable Rating | Outdoor use |
Construction | Rugged polyolefin overall jacket, non-conductive, water blocking gel |
Shield | None |
Jacket Material | Plenum: Low-smoke, flame-retardant thermoplastic |
Jacket Colors | Standard black |
Calculated Cable O.D. | 0.23” inches (5.8mm) |
Cable Weight | 25.75 lbs/1000ft (11.68 kg/305m) |
Applications | HDBase-T A & B (Cat 6) 5 Gigabit Ethernet (IEEE 802.3bz)(Cat 6) 2.5 Gigabit Ethernet (IEEE 802.3bz) Gigabit Ethernet (IEEE 802.3ab) 100 Mbps Ethernet (IEEE 802.3u) 1000 Mbps ATM 622 Mbps ATM 15W PoE (IEEE 802.3af) 30W PoE+ (IEEE 802.3at) 60W PoE++ (IEEE 802.3bt Type 3) 100W PoE++ (IEEE 802.3bt Type 4) |
Storage Temperature | -40°C to +70°C (-40°F to +158°F) |
Installation Temperature | -20°C to +70°C (-4°F to +158°F) |
Operation Temperature | -40°C to +70°C (-40°F to +158°F) |
Input Impedance | 100 ± 15 Ω (1.0 to 100 MHz) 100 ± 20 Ω (101 to 250 MHz) |
Maximum Conductor Resistance | 330 pF/100 meters |
Voltage Rating | 300 Volts |
Maximum Delay Skew | 45 ns/30 meters |
Nominal Velocity of Propagation (NVP) | 63% |
Ampacity | Refer to catalog for chart |
Gauge | 24 AWG |
Conductor Type | Bare copper |
Number of Conductors | 8 (4-pair) |
Packaging | 1,000 ft reels Reverse sequential footage markings standard on each 1,000-foot package |
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Choose Cat5e as your cable type when you need a dependable, powered Ethernet link to outdoor devices or between buildings with a straightforward plan. It delivers power and data on one line, uses a UV-resistant jacket and gel core for weather protection in buried or duct paths, and offers solid Gigabit performance with easy install/maintenance value.
If your route is very long or you expect much higher future bandwidth, fiber is a good cable to consider instead.
Our Outdoor Cat5e Cable is made in the USA with repeatable cable quality trusted across the industry, it pairs a UV-resistant jacket with a water-blocking gel core and supports PoE up to 100 W. Compact reels with reverse sequential footage simplify on-site verifying, and spec-friendly materials (RoHS 3, 24-AWG bare copper) make it straightforward for business teams to buy and document.
Yes—PoE classes up to 100W are supported for outdoor network endpoints, such as cameras, when installed within specifications.
It’s UTP. There’s no overall shield to bond to ground, so you should mind separation from noise sources to limit EMI during the run.
A gel-filled core mitigates ingress from rain or snow, and the black jacket’s sheathing is UV-resistant for prolonged sunlight exposure.
Speak with an Expert
To Discuss Your Application Needs
Samples are available in 1m increments, up to 5m. Quotes are available for larger orders, available in 100m increments, subject to availability.
