Skip to main content


Category 5e Unshielded Twisted Pair Cable

Drybit Cable

Category 5e is UL verified Category 5e and REACH and RoHS 2 compliant. Category 5e 350 is tested from 1 to 400 MHz and applications include Ethernet, HDBaseT, P0E+ and more. Made in USA.

Product Highlights

  • REACH & RoHS 2 compliant.
  • Made in USA.
  • UL Verified to ANSI/TIA-568-D.2.
  • Low Smoke Plenum construction.
  • Guaranteed minimum performance.
  • Tested from 1 to 400 MHz.
  • No internal pair separator.
  • CMR-LSHF version offers a halogen free design for improved environmental performance.
Speak with a cable specialist

Product Details


Plenum Part Number
Plenum: 39419-8
Riser: 38696-8
LSHF: 30308-8
Manufacturing Location
This product is produced and manufactured in the USA
Cable Rating
Plenum , Riser and Riser-Low Smoke Halogen Free (LSHF)
Primary Insulation
Dual Layer Jacket, Plenum-rated Fluoropolymer Insulation
Jacket Colors
Black (BK); Blue (BL); Brown (BR); Gray (GA); Green (GR); Orange (OR); Red (RD); White (WH); Yellow (YE)
Calculated Cable O.D.
Plenum: 0.18 inches (4.57 mm)
Riser: 0.17 inches (4.55 mm)
Riser-LSZH: 0.19 inches (4.80 mm)
Cable Weight
Plenum: 20.36 lb/1000ft (9.24 kg/305m) Riser: 17.86 lb/1000ft (8.10 kg/305m)
Riser-LSZH: 20.37 lb/1000ft (9.24 kg/305m)
5 Gigabit Ethernet (IEEE 802.3bz)
2.5 Gigabit Ethernet (IEEE 802.3bz)
Gigabit Ethernet (IEEE 802.3ab)
100 Mbps Ethernet (IEEE 802.3u)
1000 Mbps ATM
622 Mbps ATM
15W PoE (IEEE 802.3af)
30W PoE+ (IEEE 802.3at)
60W PoE++ (IEEE 802.3bt Type 3)
100W PoE++ (IEEE 802.3bt Type 4)
Storage Temperature
-40°C to +70°C (-40°F to +158°F)
Installation Temperature
0°C to +60°C (+32°F to +140°F)
Operation Temperature
-40°C to +70°C (-40°F to +158°F)


Input Impedance
100 ± 15Ω (1.0 to 250 MHz)
Maximum conductor resistance
9.38 Ω/100 meters @ 20°C
Voltage Rating
300 Volts
Maximum Delay Skew
45 ns/30 meters
Nominal Velocity of Propagation (NVP)
Plenum: 70%
Riser: 68%
Refer to catalog for chart


23 AWG
Conductor Type
Bare Copper
Number of Conductors
8 (4-Pair)


1,000 foot
Reverse sequential footage markings standard on a 1,000 ft packages


5e Outdoor Cross Section

Installation Notes

  1. During installation, take precautions to ensure any water present in pathways does not enter the open end of the cable. Water infiltration via the open ends of the cable will negatively impact cable performance and void and applicable product warranty.
  2. To ensure safe operation, install cables according to all applicable local and national electrical codes.

Resources / Downloads

People Who Viewed This Item Also Viewed:

page top